Мини-экскаватор

TEREX Schaeff HR18 2x TL 1xGRWH Greifer Hydraulikhamm

Terex Schaeff HR18 / 3rd Control Circuit / Grapple Kit / Boom 1,650 mm / Articulated Boom
Schaeff HR18 Quick Coupler, mechanical / Non-pressurized return line for hydraulic hammer
Godpfx Ao Akf I Uepaokd
2x Digging Buckets / 1x Grading Blade / 1x Hydraulic Hammer / 1x Clamshell Grapple
---->
----
Digging Bucket:
Manufacturer: AfB,
Width: 300 mm,
Teeth: Kingmet MG5L teeth with bolt-on cutting edge,
Mount: Schaeff HR18,
Year of manufacture:

Digging Bucket:
Manufacturer: AfB,
Width: 500 mm,
Capacity: 150 liters,
Weight: 115 kg,
Teeth: Kingmet MG5L teeth with bolt-on cutting edge,
Mount: Schaeff HR18,
Year of manufacture:

Grading Blade:
Manufacturer: AfB,
Width: 1,400 mm,
Capacity: 205 liters,
Weight: 230 kg,
Mount: Schaeff HR18,
Year of manufacture:

Clamshell Grapple: (Mount does not fit Schaeff)
Manufacturer: Kinshofer,
Type: PZG350G
Grapple shell width: 650 mm,
Capacity: 350 liters,
Pressure max.: 260 bar,
Weight without swivel motor: 225 kg,
With side cylinder and swivel motor,
Teeth: 5 pieces,
Year of manufacture: 1998

Hydraulic Hammer:
Manufacturer: Atlas Copco,
Type: TEX 1H,
Mount: Schaeff HR18,
Year of manufacture: 1998

Terex Schaeff HR18 Monoblock boom and articulated boom:

Operating weight: 4,680 kg,

3rd control circuit, black/white,

Grapple kit,

Boom 1,650 mm,

Schaeff HR18 quick coupler, mechanical,

Non-pressurized return line for hydraulic hammer,

Rubber tracks,

Dozer blade 1,870 mm,

Front windshield wiper,

Preparation for rotating beacon,

Operator cabin with interior lighting,

Heater,

Radio,

Sliding front window,

Operator seat, mechanically sprung,

1x LED work light on top of cabin,

Engine:
Manufacturer: Mitsubishi,
Type: 4-cylinder diesel engine,
Operating principle: 4-stroke swirl chamber injection,
Power according to ISO 9249 (DIN 70020 at 2,200 min-1): 34.6 kW / 47 hp,
Displacement: 2,505 cm³,
Cooling system: Water,

Electrical System:
Operating voltage: 12 V,
Battery: 12V / 74Ah,

Travel Drive:
Two-stage hydrostatic travel drive with axial piston variable motor and reduction gearbox, fully encapsulated,
"Straight-Travel" function,
Travel brake valve for downhill travel,
Travel speed forward and backward: 0 - 2.9 / 5.2 km/h,
Gradeability: max. 60%,
Traction force (1st travel stage / 2nd travel stage): 4,200 / 2,350 daN,

Undercarriage:
Maintenance-free crawler undercarriage,
Idler wheel suspension with hydraulic track tensioning,
Width of rubber crawler tracks: 400 mm,
Track width: 1,450 mm,
Track length (wheelbase/overall): 1,916 / 2,427 mm,

Dozer Blade:
Independent of the travel operation, sensitively controllable with a hand lever,
Width x Height: 1,860 x 400 mm,
Lift below ground level: 307 mm,
Lift above ground level: 402 mm,
Angle of slope: 35°,
Slope compensation: 7.6°,

Steering:
Independent individual control of the crawler tracks, also in opposite directions by means of a dual-circuit hydraulic system,
Operation via hand lever, combined with foot pedals, footrest on pedal console,
During a loading process, automatic switching to stage 1 with full steering power,

Swivel Mechanism:
Hydrostatic drive with axial piston motor and reduction gearbox,
Internal toothed slewing ring,
Swivel speed: 0 - 9.3 min-1,
Swivel brake: The hydrostatic swivel drive acts as a low-wear swivel brake,

Hydraulics:
Working hydraulics: Total performance-controlled dual-piston variable pump for all working movements and travel drive,
1 gear pump for swiveling and dozer blade,
1 pump for pilot pressure,
Three movements can be controlled indep

Объявление было переведено автоматически. Возможны ошибки перевода.