сменный кузов с коробчатой конструкциейKerex
Fifty Box
сменный кузов с коробчатой конструкцией
Kerex
Fifty Box
VB без учета НДС
4 443 €
(5 376 € брутто)
Состояние
Бывшее в употреблении
(полностью работоспособен)
Местонахождение
Praha 

Базовые данные
- Обозначение:
- сменный кузов с коробчатой конструкцией
- Производитель:
- Kerex
- Модель:
- Fifty Box
- Состояние:
- б/у
- Работоспособность:
- полностью работоспособен
Цена и местонахождение
VB без учета НДС
4 443 €
(5 376 € брутто)
- Местонахождение:
- Praha, Чехия

Технические детали
Размеры и вес
Общий вес:
2 700 кг
Собственный вес:
1 500 кг
Максимальная грузоподъёмность:
1 200 кг
Объем грузового пространства:
22 м³
Длина грузового отсека:
3 750 мм
Ширина пространства для загрузки:
2 550 мм
Высота грузового отсека:
2 750 мм
Дополнительные сведения
Цвет:
белый
Детали предложения
- Код объявления:
- A233-13-801
- Обновление:
- в последний раз 10.11.2026
Описание
Floor unit
Made of bent profiles with a thickness of 4 mm, steel grade 52.2, floor structure with a height of 203 or 180 mm, floor plate made of non-slip, waterproof plywood with a thickness of 27 mm (24 mm). Fastening elements with a special design, four rigid or telescopic supports, extendable door ladder. The guide tunnel with a width of 600 mm is made of two closed profiles. A protective profile to prevent damage during transport is located at the front.
Housing – trapezoidal
Side, front, and roof panels are made of galvanized perforated sheet metal, grade St. 37.2. The rear portal consists of double-leaf doors made of galvanized sheet metal or roll-up gates. A protective profile with a height of approximately 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2. Four ventilation openings in the side walls. Steel bumpers are located in the lower part of the rear portal to protect the body from damage.
Housing – smooth
Side and front panels are made of smooth cassettes made of galvanized sheet metal, grade St. 37.2, roof panels are made of galvanized perforated sheet metal, the rear portal consists of double-leaf smooth doors made of galvanized sheet metal or roll-up gates, a protective profile with a height of 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2, four ventilation openings in the side walls. Steel bumpers protecting the body from damage are located in the lower part of the rear portal.
Surface treatment and marketing description
Sandblasting to SA 2.5
Chemical degreasing and preliminary chemical treatment for corrosion protection in the immersion tube
Cathodic immersion coating in a light shade on the outside and inside
Powder coating in RAL color on the outside and inside upon customer request
Marking and warning labels according to DIN 284, DIN 283 standards
Fgjdo Aitplopfx Aa Hei
Marketing description according to the proposal
Contact: Mon-Fri from 8 am to 4 pm, I respond to SMS messages
The container is currently in the Czech Republic (Prague).
Объявление было переведено автоматически. Возможны ошибки перевода.
Made of bent profiles with a thickness of 4 mm, steel grade 52.2, floor structure with a height of 203 or 180 mm, floor plate made of non-slip, waterproof plywood with a thickness of 27 mm (24 mm). Fastening elements with a special design, four rigid or telescopic supports, extendable door ladder. The guide tunnel with a width of 600 mm is made of two closed profiles. A protective profile to prevent damage during transport is located at the front.
Housing – trapezoidal
Side, front, and roof panels are made of galvanized perforated sheet metal, grade St. 37.2. The rear portal consists of double-leaf doors made of galvanized sheet metal or roll-up gates. A protective profile with a height of approximately 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2. Four ventilation openings in the side walls. Steel bumpers are located in the lower part of the rear portal to protect the body from damage.
Housing – smooth
Side and front panels are made of smooth cassettes made of galvanized sheet metal, grade St. 37.2, roof panels are made of galvanized perforated sheet metal, the rear portal consists of double-leaf smooth doors made of galvanized sheet metal or roll-up gates, a protective profile with a height of 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2, four ventilation openings in the side walls. Steel bumpers protecting the body from damage are located in the lower part of the rear portal.
Surface treatment and marketing description
Sandblasting to SA 2.5
Chemical degreasing and preliminary chemical treatment for corrosion protection in the immersion tube
Cathodic immersion coating in a light shade on the outside and inside
Powder coating in RAL color on the outside and inside upon customer request
Marking and warning labels according to DIN 284, DIN 283 standards
Fgjdo Aitplopfx Aa Hei
Marketing description according to the proposal
Contact: Mon-Fri from 8 am to 4 pm, I respond to SMS messages
The container is currently in the Czech Republic (Prague).
Объявление было переведено автоматически. Возможны ошибки перевода.
Поставщик
Поставщик в настоящее время проходит проверку. Ваш запрос будет передан и может быть обработан поставщиком после успешного завершения проверки.
Отправить запрос
Ваше объявление было успешно удалено
Произошла ошибка








