Мини-экскаватор

KOMATSU PC30MR-5 Kompaktbagger Powertilt HS03/3.+4.Kreis

SN: 204

Komatsu PC30MR-5 Compact Excavator with Powertilt HS03 Quick Coupler
3rd and 4th control circuits AUX1/AUX2 proportionally controlled
Load hook on HS03 quick coupler, factory installed
Boom 1,240 mm / Rigid digging bucket 1,200 mm

----UVV valid until: 11/2026
----Last customer service at 1,403 operating hours on 08/25/2025
Next customer service at 2,000 operating hours
----
Powertilt with rigid digging bucket 1,200 mm
Manufacturer: Lehnhoff,
Weight: 82 kg,
Load hook: 3 tons,
Year of manufacture: 2022

Machine weight: approx. 3,380 kg,

Boom length: 1,240 mm,

3rd and 4th control circuits AUX1/AUX2 proportionally controlled,

Load holding valve on boom cylinder,

Load holding valve on stick cylinder,

Load hook on MS03 quick coupler, factory installed,

Switchover valve for pressureless return for hydraulic hammer,

Battery main switch,

Piston rod protection,

Yanmar engine 3TNV88F,

Rubber tracks,

Blade 1,550 mm,

2x work lights halogen on top of the cab,

1x work light halogen on the rear of the cab,

Tiltable cab,

Cigarette lighter,

ROPS cab,

Heater,

Radio,

Front windshield sliding,

Driver's seat mechanically sprung,

Engine:
Dodpfez Nt Dqjx Alrowc
Yanmar 3TNV88F,
Type: Water-cooled, 4-stroke engine with direct injection,
Engine power at rated speed: 2,200 rpm,
Engine power ISO 14396: 18.2 kW,
Number of cylinders: 3,
Bore x Stroke: 88 x 90 mm,
Displacement: 1,642 cm³,
Max. torque / speed: 105.1 Nm / 1,440 rpm,
Air filter type: dry

Hydraulic system:
Type: Komatsu CLSS hydraulic system,
Main pump: 2 variable displacement pumps,
Max. flow rate: 35.7 x 2 + 18.7 + 9.9 l/min.,
Max. operating pressure: 270 bar,
Hydraulic motors, travel drive: 2 variable displacement motors,
Hydraulic motors, swing: 1 fixed displacement motor,
Hydraulic cylinders (diameter x length), boom: 80 x 550 mm,
Hydraulic cylinders (diameter x length), stick: 75 x 495 mm,
Hydraulic cylinders (diameter x length), bucket: 65 x 490 mm,
Hydraulic cylinders (diameter x length), boom swing: 80 x 500 mm,
Hydraulic cylinders (diameter x length), blade: 95 x 140 mm,
Breakout force (ISO 6015): 2,942 daN (3,000 kg),
Tear force (ISO 6015), 1,240 mm stick: 1,765 daN (1,800 kg)

Travel drive and brakes:
Control: 2 joysticks/pedals enable separate control of both tracks,
Drive system: hydrostatic,
Hydraulic motors: 2 axial piston motors,
Reduction gear: planetary gear,
Max. travel speeds Lo/Hi: 2.6 / 4.6 km/h,
Max. tractive force: 3,335 daN (3,400 kgf)

Undercarriage:
Design: X-frame with undercarriage frame in box construction,
Track rollers (per side): 4,
Support rollers (per side): 1,
Ground pressure (standard): 0.30 kg/cm²

Swing mechanism:
Drive with an orbital hydraulic motor and single-row, internal-toothed ball bearing and centralized lubrication,
Swing speed: 9.0 rpm.

Blade:
Type: Welded construction, one-piece design,
Width x height: 1,550 x 355 mm,
Blade max. lifting height: 360 mm,
Blade max. digging depth: 310 mm

Capacities:
Fuel tank: 41 liters,
Cooling system: 3.3 liters,
Engine oil (refill quantity): 7.2 liters,
Hydraulic system: 39 liters

Operating weight:
approx. 3,380 kg,

Environment:
Engine emissions: according to European emission standard EU Stage V,
Noise level - LwA environment: 94 dB(A) (2000/14EC Stage II),
Noise level - LpA driver's ear: 75 dB(A) (ISO 6396 dynamic test),
Vibration level (EN 12096:1997):
Hand-arm vibration: < 2.5 m/s² (uncertainty K = 0.58 m/s²),
Whole-body vibration: < 0.5 m/s² (uncertainty K = 0.22 m/s²),

Dimensions & working range:
Lengt

Объявление было переведено автоматически. Возможны ошибки перевода.