Погрузчик с колёсным шасси

TEREX Radlader TL80 Schnellwechsler 3ter Steuerkreis

SN: 207

Terex Wheel Loader TL80 with hydraulic quick coupler,
3rd control circuit,
Light material bucket approx. 1.5 m³

Deutz engine F4M 2011, 44 kW / 60 HP, oil-cooled 4-cylinder diesel engine

Display defective, operating hours not readable,
operating hours approximately 6,000 h

Hydraulic quick coupler Schaeff / Terex,
ZF axles,
3rd control circuit,
1x LED work light front upper cab,
1x halogen work light front upper cab,
1x halogen work light rear upper right cab,
Windscreen wiper front,
Windscreen wiper rear,
Radio pre-installation,
Tyres: Dunlop SP T9 405/70R18 EM-01,
Boom length: 2,120 mm,
Machine width: 1,800 mm.

Engine:
Manufacturer: Deutz,
Type: F4M 2011,
4-cylinder inline diesel engine,
direct injection via single injection pumps,
displacement: 3,100 cm³,
power: 44 kW / 60 HP,
cooling system: integrated oil cooling (no separate water system required).

Electrical system:
Operating voltage: 12 V,
Lighting system according to StVZO and Euro standards
Godpfxjyuq Efe Aadstw

Drivetrain:
Hydrostatic drive, closed circuit, independent from loader hydraulics.
Advanced drive automation, automatic optimization of tractive force and speed. Via a load-shifting adjustment at the hydromotor, two speed ranges can be selected. Infinitely variable speed regulation forward and reverse. All-wheel drive from reduction gearbox at rear axle via propeller shaft to front axle. Brake inch pedal.

2 driving ranges:
Speed range I: 0 - 7 km/h,
Speed range II: 0 - 20 km/h

Axles:
Front axle: planetary axle with integrated central disc brake, rigid mounted. Self-locking differential
Rear axle: planetary axle with integrated reduction gear, pendulum mounted, cushioned by rubber buffers. Self-locking differential
Oscillation angle: +10°

Tyres:
405/70R18SPT9

Brakes:
Auxiliary brake: Hydrostatic via closed circuit of the travel drive,
Parking brake: Mechanically operated disc brake on the front axle

Steering:
Articulated steering, 1 steering cylinder with end position damping on both sides, quick and light steering even at engine idle speed.
Total steering angle: 80°

Fluid capacities:
Diesel tank: approx. 75 liters,
Hydraulic system (incl. tank): approx. 55 liters

Operating data standard equipment:
Operating weight ISO 6016: approx. 4,800 kg,
Tipping load straight ISO 14397-1: approx. 3,720 kg,
Tipping load articulated ISO 14397-1: approx. 3,280 kg,
Total length, bucket on ground: approx. 5,060 mm,
Total width: 1,850 mm,
Wheelbase: 2,100 mm,
Height over cab: 2,640 mm

Hydraulics:
Pump capacity: approx. 64 l/min.
Working pressure: approx. 250 bar

Loader system:
Loader system with parallel kinematics and integrated hydraulic quick coupler,
Lifting force at ground level ISO 14397-2: approx. 48,000 N,
Breakout force ISO 14397-2: approx. 45,000 N.

Cab:
Full-vision steel cab, ROPS certified.
The driver's cab is equipped with two doors, electric wipers with interval control and washer front and rear, left sliding window.
Driver’s seat (basic) with hydraulic suspension, weight adjustment, and lap belt according to ISO 7096 and ISO 6683.
Radio installation preparation,
Tilt-adjustable steering wheel,
2 front work lights.

Accessories:

Light material bucket:
Capacity: approx. 1.5 m³,
Dimensions LxWxH: 1,600 x 2,070 x 1,160 mm,

Объявление было переведено автоматически. Возможны ошибки перевода.