Шламовая технология

Wienhoff 20.300 TW PROFI LINE

20,300 TW PROFI LINE
(0010) Used Wienhoff 20,300 TW PROFI LINE
(0020) Slurry tanker with internal coating and
(0030) external paint finish.
(0040) 6.20m cylinder,
(0050) 6mm wall thickness, 2.00m tank diameter, 3
(0060) welded baffles inside the tank and
(0070) manhole cover aligned with the rear
(0080) lid.
(0090) Tank with liquid displacement
(0100) for optimum drawbar load.
(0110) Color: RAL 6002 (leaf green).
(0120) Simple tank venting and aeration via a
(0130) galvanized pipe routed through the tank.
(0140) E-hydraulics – secondary tank venting and
(0150) aeration at the rear for FV.
(0160) Level indicator tube (sight glass) 150 mm
(0170) at the front of the tank.
(0180) Float-type level gauge (float diameter ___ mm) at front of tank with CAN bus compatibility.
(0200) 8” suction connection reduced to 6” with hydraulic
(0210) slider and quick coupling.
(0220) Quick coupling with ball valve at the front left.
(0230) 6” manual slider with quick coupling
(0240) (directly on the tank for suction).
(0250) 14 t Gigant air suspension, tandem,
(0260) forced steering via cable, 150 BPW axles,
(0270) track width 2225mm.
(0280) Low center of gravity: axles above
(0290) the springs, wheel arches above both axles.
(0300) Wienhoff “L&S” Safety Plus for
(0310) tandem:
(0320) - automatic air suspension pressure adjustment
(0330) according to load distribution
(0340) - roll stability program (RSP)
(0350) - ABS system
Csdpeyhr Nxjfx Acyopu
(0360) - drawbar load sensor
(0370) Tyres: 800/60 R 32 Vredestein Flotation Trac
(0380) Hydro-pneumatic sprung lower linkage
(0390) K80 with hydraulic support leg, K80 with large
(0400) flange (4 t).
(0410) Dual-circuit air brake with ALB
(0420) 40 km/h equipment with galvanised mudguards:
(0430) Galvanised mudguards with round steel edges,
(0440) warning plates and outline marker lights
(0450) underrun protection with truck lighting
(0460) 40 km/h TÜV certificate
(0470) Additional lighting on top of tank, in LED design.
(0490) 2 LED work lights,
(0500) positions:
(0510) 2x left/right
(0520) 2x rear
(0530) 1x on suction arm
(0540) Active marker lights (in place of reflectors) on the vehicle sides, LED.
(0560) Large stone trap with door opening
(0570) and preparation for RotaCut M
(0580) 10 Vogelsang rotary lobe pump VX 186/390Q - ___ L/min
(0610) Injection system with hydrostat
(0620) hydraulically regulated rotary lobe pump via ___ rpm.
(0640) PTO shaft,
(0650) - gearbox
(0660) - hydrostatic pump
(0670) - controlled oil cooler & oil tank
(0680) Drain cocks on the pump’s suction and
(0690) pressure sides.
(0700) Wienhoff fill turbine 8-inch, type 30
(0710) for docking arm.
(0720) With valve for E-hydraulics.
(0730) Monitoring unit for pressure side
(0740) Pressure gauge on pressure side with
(0750) membrane gauge
(0760) Monitoring unit for suction side
(0770) Vacuum gauge on suction side
(0780) with membrane gauge.
(0790) With 8” inspection flap.
(0800) 2” overpressure valve at the vacuum gauge.
(0820) Pressure filter before the control block!
(0830) WieTaCon 14-1 / PTW basic function.
(0840) Aux variant 6 / suction / docking arm
(0850) all / boom / distribution / headland / 2-axle joystick.
(0870) Additional control box for suction slider
(0880) at lower left and right.
(0890) Additional control box for linkage lift up/down
(0900) at rear left.
(0910) Installation of delivered camera
(0920) Preparation for Wienhoff N-Sensor
(0930) Hydraulic pipes, instead of hoses, routed
(0940) to the rear, coupling holders
(0950) on rear sides.

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.