Сменный кузов прицеп

WECON 4x Duke WPR715 SG RAPIDO Bodenstaufach verzinkt

WhatsApp
WECON Curtainsider SLIDING TARPAULIN PLATEAU BDF Swap Body
Duke Type WPR 715 SG
Year of manufacture 04/2021
First German owner!
4 WPR 715 SG trailers with the following equipment:
WECON standard swap body with sliding curtains, Duke, type WPR 715 SG
External dimensions
Body length: 7,150 mm
Body width: 2,550 mm
Interior dimensions
Body length: 7,040 mm
Body width: 2,480 mm
Terrain weight: 2,590 kg
GVWR: 16,000 kg
Interior height: 2,200 mm with sliding roof included
Exterior height: 2,450 mm (corner height 2,450 mm = C 00)
Side loading height: 2,120 mm
Rear loading height: 2,165 mm
Floor storage compartment at the rear in the floor frame
--> This limits the centering tunnel
Floor frame: Construction made of galvanized quality steel, overall height 215 mm mm,
4-way container corner fittings on a 20' base, 4 gripping edges according to EN 284, wheel clearance 120 mm
Floor covering for swap bodies: Multi-layered laminated wood floor, approximately 25 mm thick, forklift-accessible, suitable for an axle load of up to 5,460 kg
Rigid support legs, parking height 1,320 mm, galvanized
15 pairs of lashing rings. Distribution: From the front of the trailer body to the middle of the first pair of lashing rings, approximately 400 mm long. Then evenly distribute the remaining lashing rings.
Lashing rings, 1 pair, mounted on the inside of the end wall, 1,000 mm high from the top edge of the floor.
Pallet stop edge 30 mm high on one side, left in the direction of travel, normal tarpaulin side.
Lashing options via slotted holes (approx. 15 x 30 mm). Distance between slotted holes approx. 200 mm.
The loading height is reduced by 30 mm.
Front wall: smooth, bolted steel front wall, with a full-height cassette construction (cassettes galvanized).
Screen-printed panel on the inside of the front wall, 1500 mm high, 12 mm thick.
Interior front wall with impact protection consisting of 300 mm high, galvanized sheet steel.
Smooth double-leaf portal door, sandwich construction, 4 internal espagnolette locks, 4 hinges per door leaf.
Left side wall: sliding tarpaulin in accordance with DIN EN 12641-2: 890 g/m² quality, 500 x 600 mm webbing pattern, tear strength: vertical 24 kN, horizontal 13 kN. VA belt buckle with pressure relief device.
1 center stanchion, symmetrically arranged --> Left-hand direction of travel
Stanches each with 3 rows of slatted pockets included and one row of collecting pockets (approx. 600 mm high) on the floor
8 aluminum insert slats, left-hand direction of travel, approx. 100 mm high
Wecon RAPIDO RIGHT: vertical steel profiles attached to the side tarpaulin and guided in the upper and lower guide rails via rollers.
- Vertical tarpaulin tensioners are omitted
- Center stanchions are omitted
- Horizontal insert slats are omitted
Fixed tarpaulin roof: sliding roof, standard only with locking mechanism.
Roof with adjacent guide rails, width between guide rails approx. 2,370 mm, distance between lower edge of guide rail and lower edge of bow approx. 90 mm
Coating: Floor frame and support legs hot-dip galvanized, body parts dip-primed and
powder-coated in standard RAL colors,
Roof tarpaulin: RAL 9010 (pure white)
Side tarpaulin: RAL 9010 (pure white)
Front wall: RAL 9010 (pure white)
Rear portal: RAL 9010 (pure white)
TÜV Code XL certificate included
This certificate confirms the load securing effectiveness of the vehicle body. Requirements according to VDI 2700, EN 283, EN 12195 Part 1-2000, ADR, and EN 12642 - Code XL are met.
Gsdpfx Aev Rtygjb Seuh
Accesso

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.