Низкорамный полуприцеп

NOOTEBOOM OSDS-Semi-Tieflader

Fifth wheel height: 1200-1250 mm
Gooseneck cross-section: 185 mm
Gooseneck length: 3800 mm
Front overhang: 1200 mm
Front radius: 1560 mm
Free turning radius under gooseneck: 2350 mm
Gooseneck bevel: 750 mm x 14°
Gooseneck width: 2520 mm
Loading area
Riding height loaded (-/+ lift): 860 mm -70/+130 mm
Step to gooseneck: 550 mm
Loading area length: 9250 mm
Loading area bevel: 1150 mm x 5°
Loading area width: 2520 mm
Loading area widening up to max: 3020 mm
Axle spacing
King pin? first axle: 7190 mm

Rear wheelbase: 1360 mm

Rear overhang: 2340 mm

King pin ? Rear: 12250 mm

Ramps
Ramp angle: 4000 mm x 11°

Height in driving position: 3265 mm

Width when pushed together over ramps: 1770 mm

Width when extended over ramps: 2990 mm

Ramp width: 880 mm

Power supply
- Connections for brakes, lighting and EBS centrally on the front console.
- NATO connection cable in spiral flex design (spiral cable).
- NATO socket assembly kit for tractor is not included.

Front bulkhead / box
- Lockable steel tool box on the front of the gooseneck, divided into three compartments, with side doors and stainless steel lid on top. Color silver gray RAL 9006. SUITABLE FOR INSTALLATION OF A WINCH.

Gooseneck options
- Spare wheel holder mounted on the front.
- A lashing eye on the back of the gooseneck for hooking the steel cable.
- 3 aluminum side walls on the gooseneck, height 400mm, all three approx. 2.3m long.

Loading area
- The loading area is beveled with 1150x100m (5°).
- Tubular central frame with practical cross members. This makes the semi-trailer very torsion-resistant and therefore very stable when loaded.
- In places where necessary, the cross members are reinforced to ensure that machines can pass safely.
- 6/8mm tear plate above the axles.
- Cross members 4cm deep.
- Cross members 4cm deep in bevel.
- Loading area above the tires reinforced for road milling machines up to max. Wirtgen 1000DC.
- Extendable widening brackets every approx. 1.40m to widen the loading area by 250mm per side.

Brakes
- 2-line Wabco EBS braking system, with automatic load-dependent brake force control (ALB), anti-lock braking system (ABS), and roll-over stability support (RSS).
- Parking brake via spring cylinder on several axles.
- ISO couplings for connecting the brakes
- A Duomatic connection mounted parallel to the ISO air connections.

Lighting
- Wiring is based on Hella EasyCon and complies with insulation standard IP69, suitable for ADR.
- 2 7-pin sockets (ISO-N and ISO-S) on the front console.
- White/red outline lights, orange side lights and license plate lighting in LED design.
- Rectangular LED tail lights. (According to EU directives, the truck must be able to monitor the trailer's (LED) direction indicators).
- 1 complete all-round light connection at the rear.
Lrjlhcdwsicfare Aei
- Preparation for warning signs on the gooseneck and axle frame, consisting of holders and sockets.
- 4 adjustable red/white warning signs with protected mounted position lights in LED design.
- All-round light connections on the warning signs.
- Pair of additional holders for mounting warning signs in the existing stake pockets on top of the loading area.
- All-round light in LED design. (10W - 24V/0.4A - 12V/0.8A)
- Additional 2-pin socket mounted on the left ramp.
- Additional 2-pin socket mounted on the right ramp.
- 2 LED work lights

Объявление было переведено автоматически, в связи с чем могут иметь место некоторые ошибки перевода.